İstanbul Tuzla Kimya San. O.S.B. Melek Aras Bulvarı No: 61 34956 Tuzla - İstanbul +90 216 593 05 72
aplas@aplas.com.tr
6040 A System Eco

• Profile wall thicknesses are produced within 2,1 mm tolerances.
• Single, dual, and triple glass up to thicknesses of 5mm, 20mm, 24mm, and 32mm can be applied.
• By triple glass application it provides sound insulation of up to 58 decibels
• Special design TPV gaskets provide certain impermeability, it has a high durability to sunlight and external factors it does not get deformed by these conditions.
• The 10° slope and 8 mm radius at the profile surface facilitate the discharge of water, it does not allow any water leakage or accumulation after rain.
• Thanks to its specially designed 16° outward slope and water collection chamber the water discharges easily.
• Due to the height difference between the inner and outer walls it prevents the discharged water to get inside by the wind. Also, canals that do not contact with a supporting sheet provide air ventilation.
• Thanks to enhancing feathers the screws of hinges placed in prevent the window to sag by the time.
• Decorative and single bead profiles. Prevents dust to hold onto profiles. Also by force on the glass surface, they enable a better grip on the glass.
• The cams under the profiles enable easy assembly and disassembly. Facilitate space for scaling during assembly and decreases heat transfer also compatible to work with ancillary profiles.
• Reinforced with specially designed single-type galvanized fortier iron sheets, the profiles are resistant to external loads and enduring against wind pressure.
• Thanks to its 1st class quality raw materials used in formulation, it provides perfect protection against the toughest climatic conditions, external ambiances, sunlight, and UV rays as well as corrosive environments.
• All main profiles, since lock doors are inclusive, provide perfect heat insulation. ( Uf= 1,432 W \ m2 °K)
• Its surfaces are smooth and brilliant.

You Can Examine Our Alternative Products

Producer of UPVC profiles and plastic wrapping materials AKPLAST was founded in 1992 as a division of AKPA ALUMINIUM with production of plastic panel and window shades. In 1993 AKPLAST has become an independent company through start of production of polyethylene wrapping and took its place in plastic industry.

ADDRESS

İstanbul Tuzla Kimya San. O.S.B. Melek Aras Bulvarı No: 61 34956 Tuzla - İstanbul

PHONE

+90 216 593 05 72

E MAIL

aplas@aplas.com.tr

AK-PLAST PLASTİK AMBALAJ SAN. VE TİC.LTD.ŞTİ. All Rights Reserved Copyright © 2024

TR
6040 A System Eco

• Profile wall thicknesses are produced within 2,1 mm tolerances.
• Single, dual, and triple glass up to thicknesses of 5mm, 20mm, 24mm, and 32mm can be applied.
• By triple glass application it provides sound insulation of up to 58 decibels
• Special design TPV gaskets provide certain impermeability, it has a high durability to sunlight and external factors it does not get deformed by these conditions.
• The 10° slope and 8 mm radius at the profile surface facilitate the discharge of water, it does not allow any water leakage or accumulation after rain.
• Thanks to its specially designed 16° outward slope and water collection chamber the water discharges easily.
• Due to the height difference between the inner and outer walls it prevents the discharged water to get inside by the wind. Also, canals that do not contact with a supporting sheet provide air ventilation.
• Thanks to enhancing feathers the screws of hinges placed in prevent the window to sag by the time.
• Decorative and single bead profiles. Prevents dust to hold onto profiles. Also by force on the glass surface, they enable a better grip on the glass.
• The cams under the profiles enable easy assembly and disassembly. Facilitate space for scaling during assembly and decreases heat transfer also compatible to work with ancillary profiles.
• Reinforced with specially designed single-type galvanized fortier iron sheets, the profiles are resistant to external loads and enduring against wind pressure.
• Thanks to its 1st class quality raw materials used in formulation, it provides perfect protection against the toughest climatic conditions, external ambiances, sunlight, and UV rays as well as corrosive environments.
• All main profiles, since lock doors are inclusive, provide perfect heat insulation. ( Uf= 1,432 W \ m2 °K)
• Its surfaces are smooth and brilliant.

You Can Examine Our Alternative Products

Producer of UPVC profiles and plastic wrapping materials AKPLAST was founded in 1992 as a division of AKPA ALUMINIUM with production of plastic panel and window shades. In 1993 AKPLAST has become an independent company through start of production of polyethylene wrapping and took its place in plastic industry.

ADDRESS

İstanbul Tuzla Kimya San. O.S.B. Melek Aras Bulvarı No: 61 34956 Tuzla - İstanbul

PHONE

+90 216 593 05 72

E MAIL

aplas@aplas.com.tr
AK-PLAST PLASTİK AMBALAJ SAN. VE TİC.LTD.ŞTİ. All Rights Reserved Copyright © 2024